1 of 4 high temperature voltage control crystal oscillator vectrons vertical integration in the following technical areas ensures the ability to design and manufacture state of the art high temperature frequency control products: ? baw & saw design & fabrication to produce high quality resonators. ? rf oscillator circuit design. ? established 250c high temperature electronics packaging expertise. ? established 250c high temperature electronics assembly & test expertise. ? environmental screening. vectrons manufacturing processes, from quartz resonator fabrication to oscillator electronics assembly and test, are painstakingly controlled via iso and spc procedures. vectron fabricates high temperature quartz resonators using proprietary manufacturing processes designed specifcally for high temperature and harsh environment applications. in order to ensure high reliability in the feld, critical electrode metallization and testing processes are conducted inside state-of-the-art class 1k cleanrooms, while oscillator assembly is conducted in class 10k cleanrooms. all high temperature oscillators are 100% tested before delivery. vectron international ? 267 lowell road, unit 102, hudson, nh 03051 ? tel: 1-88-vectron-1 ? http://www.vectron.com vcxo rf output vcxo control voltage vx- 708 vx- 708 vectron ofers a high temperature voltage control crystal oscillator (vx- 708 ) product platform for extreme environment applications. typical operating temperature range is from -55c to +180c with an absolute pull range of +/- 50 ppm. voltage control oscilla tor circuit o ut p ut b uf f er features applications ? oil/gas downhole tool ? high temperature industrial process control ? extended temperature military/aerospace block diagram ? continuous operating temperature range - 55 c to 180c ? low jitter and phase noise ? 3.3 vdc operation ? 4-point crystal mount for harsh environment applications ? high shock and vibration survival ? output frequency 2 mhz to 40 mhz ? standard 5x7 mm smd package ? rohs compliant ? ear99 ? made in usa
2 of 4 performance specifcations vectron international ? 267 lowell road, unit 102, hudson, nh 03051 ? tel: 1-88-vectron-1 ? http://www.vectron.com performance specifcations performance specifcations performance specifcations performance specifcations performance specifcations performance specifcations enviromental compliance environmental compliance mechanical shock 3000g mil-std-883, method 2002.5, condition c random vibration 36.6g mil-std-883, method 2026, condition j sine vibration 30g mil-std-202, method 204, condition g seal test fine mil-std-883 method 1014 condition a2 seal test gross mil-std-202 method 112 condition d temperature cycling 1000 cycles mil-std-883 method 1010 condition b acceleration 5000g y1 axis mil-std-883 method 2001 condition a features applications description current 3 ma max (typical @ 32 mhz) output hcmos compatibility load 15pf max signal level (vol) 0.3 vdc max signal level (voh) 3.0 vdc min rise & fall time 1ns typical / 3ns max symmetry 40/60% operating temperature 0 c to +150 c -20 c to +180 c -55 c to + 180 c jitter (12khz - 20mhz) <0.076ps phase noise (@32mhz, hcmos, 3.3v) vcxo control voltage 0v to vdd 25ppm minimum 50ppm minimum transfer function positive linearity 20% shock 100g, 6ms vibration 20g (10 to 2000hz) specifcation parameter values 10 hz - 7 5 dbc/ hz 100 hz - 10 5 dbc/ hz 1 khz - 13 0 dbc/ hz 10 khz - 15 0 dbc/ hz 100 khz - 15 5 dbc/ hz 1 mhz - 160 dbc/ hz modulation rate dc - 1khz package size 5 x 7 mm smd frequency range 2 mhz to 40 mhz supply (vdd) +3.30 vdc +/-5% minimum pull range (amount of vcxo pullability to offset freq. deviation over operating temp. range)
3 of 4 vectron international ? 267 lowell road, unit 102, hudson, nh 03051 ? tel: 1-88-vectron-1 ? http://www.vectron.com phase noise performance physical specifcations pin connections (6-leads) 5.08 .200 2.54 .100 3.66 .144 marking surface [1.95] max .077 max 50.15 .197.006 70.15 .276.006 1.96 .077 1.78 .070 4 3 6 5 [1.95] max .077 max marking surface 5.08 .200 1 2 4 3 70.150 .276.006 50.15 .197.006 5.08 .200 3.66 .144 1.78 .070 1.96 .077 pin connections (4-leads) dimensions in [mm] inches dimensions in [mm] inches 1 voltage control 2 case & electrical ground 3 rf output 4 vcc power supply voltage 1 voltage control 2 no connection 3 case & electrical ground 4 rf output 5 no connection 6 vcc power supply voltage ccc-cccc 1 0m000 00 ccc-cccc 1 0m0 00 00 vx - 7081 y yww vx - 708 0 y yww
4 of 4 disclaimer vectron international reserves the right to make changes to the product(s) and or information contained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. for additional information, please contact usa: vectron international 267 lowell road, unit 102 hudson, nh 03051 tel: 1.888.328.7661 fax: 1.888.329.8328 europe: vectron international landstrasse, d-74924 neckarbischofsheim, germany tel: +49 (0) 3328.4784.17 fax: +49 (0) 3328.4784.30 asia: vectron international 68 yin cheng road(c), 22nd floor one lujiazui pudong, shanghai 200120, china tel: 86.21.6194.6886 fax: 86.21.6914.6699 ordering information *note: not all combination of options are available. other specifcations may be available upon request. product family high temp products output a: hcmos/acmos frequency factory use factory use factory use f: 25ppm k: 50ppm package code package type 708: 5x7 mm 0 : 6 pads 1 : 4 pads temperature range 1: 0c to 150c z: -20c to 180c y: -55c to 180c vx - 7 0 8 0 - d a y - f x x x - 10m0000000 supply voltage e: 3.3v 5% min. pull range 7 f d u s p o * o u f s o b u j p o b m t - p x f m m 3 p b e
6 o j u
) v e t p o
/ ) t 5 f m 7 & $ 5 3 0 / t i u u q x x x w f d u s p o d p n rev: 8 / 4 / 2017 jv
|
